Slide Board – Boomerang

Units of Measurement: Each

AUD $164.00AUD $188.00

Go back to , ,

The Slide Board – Boomerang has a curved shape and is designed to go around a wheelchair wheel. You can use it to slide to and from a wheelchair to a car, bed, chair, etc.

It can be used with:

This product is translucent.

About the Material

The plastic poly material may bend, but will not break. It is a strong and self-lubricating material. The outer surface may mark easily and a new Slide Board may look secondhand when new, but the advantages of using this material outweigh the disadvantages.

The Flat Bottom on this Slide Board – Boomerang means that it will stand upright when leaning against a wall.

Safe Working Load (SWL)

Click here for information relating to Safe Working Loads and plastic versus wooden slide boards.

Also available in the Pelican Slide Board range:

Slide Board - Aero Transfer Slide Board – Aero Transfer
Slide Board - Stubby Slide Board – Stubby
Slide Board - Wheelchair Cut Out Slide Board – Wheelchair Cut Out
Car Emergency Slide Board Kit Car Emergency Slide Board Kit
ResQslide Board & Chair Strap Kit ResQsllide Board & Chair Strap Kit
Item # 590FB6 (6mm / 0.24″ Thick) Item Weight: 1.2kg / 2.6lbs
Item # 590FB10 (10mm / 0.4″ Thick) Item Weight 2.1kg / 4.6lbs (Heavier & Firmer)

Wipe clean with a hospital grade disinfectant. Wipe dry. Ensure the product is dry before using or storing.

Non-Slip Tape Some manufacturers have non-slip tape on the back of their Slide Boards (also known as Transfer Boards). The non-slip tape is not really necessary, as the Slide Boards do not move a lot when they are correctly positioned. Non-slip tape can make it harder to position the Slide Board under a patient, and to remove the board after the transfer. If the Slide Board is used upside down, the non-slip tape will stop the person from moving. By not having any non-slip tape the Pelican Slide Boards can be used either way up. Also the non-slip tape can make it difficult to keep clean, particularly if the patient is incontinent or there may be some other cross infection reason. Remember if the person is sitting on a chair, or on a bed or operating table and the Slide Board is put under them, the Slide Board can be contaminated on both sides i.e. the top and bottom of the Board. This can be from the patient’s clothing, and from where they are sitting on the chair, bed, etc. as the chair will also be contaminated. If the non-slip tape is on the underside of the board, it means the board cannot be easily wiped clean. If a customer particularly wants non-slip tape, this can be purchased from most hardware shops and the customer can easily put non-slip tape on the Boards. Slide the Patient‚ Not the Board Remember: Slide the patient across the board. Do not slide the board, with patient on top, across the bed. Hand Slots are designed when carrying the board, not for when transferring patients.