Slide Board – Wheelchair Cut Out

Units of Measurement: Each

AUD $172.00

Go back to , , ,

The Slide Board – Wheelchair Cut Out is used to slide from a wheelchair to a car, bed, chair, etc.

The cut-out is placed around the wheelchair wheel so the Board covers more of the seat of the wheelchair. It can be used with the following products:

The short end of the Slide Board – Wheelchair Cut Out is shaped like a shovel, so it is easier to slide under a person’s bottom.

This poly material will bend, but will not break. It is a strong, self-lubricating material. The outer surface may mark easily and a new Board may look secondhand when new. The advantages of using this material outweighs the disadvantage.

This product is translucent.

Safe Working Load (SWL)

Click here for information relating to Safe Working Loads and plastic versus wooden slide boards.

Also available in the Pelican Slide Board range:

Slide Board - Aero Transfer Slide Board – Aero Transfer
Slide Board - Stubby Slide Board – Stubby
Slide Board - Boomerang Slide Board – Boomerang
Car Emergency Slide Board Kit Car Emergency Slide Board Kit
ResQslide Board & Chair Strap Kit ResQsllide Board & Chair Strap Kit

Item # 589

Item Weight: 2.15kg


83cm x 32cm x 1cm

31″ x 12.5″ x 0.4″

Wipe clean with a hospital grade disinfectant. Wipe dry. Ensure the product is dry before using or storing.

Consult your Physiotherapist, Occupational Therapist or Back Care Specialist when using Manual Handling Products.

Non-Slip Tape
Some manufacturers have non-slip tape on the back of their Slide Boards (also known as Transfer Boards). The non-slip tape is not really necessary, as the Slide Boards do not move a lot when they are correctly positioned. Non-slip tape can make it harder to position the Slide Board under a patient, and to remove the board after the transfer. If the Slide Board is used upside down, the non-slip tape will stop the person from moving. By not having any non-slip tape the Pelican Slide Boards, they can be used either way up.Also the non-slip tape can make it difficult to keep clean, particularly if the patient is incontinent or there may be some other cross infection reason. Remember if the person is sitting on a chair, or on a bed or operating table and the Slide Board is put under them, the Slide Board can be contaminated on both sides i.e. the top and bottom of the Board. This can be from the patient’s clothing, and from where they are sitting on the chair, bed, etc. as the chair will also be contaminated. If the non-slip tape is on the underside of the board, it means the board cannot be easily wiped clean. If a customer particularly wants non-slip tape, this can be purchased from most hardware shops and the customer can easily put non-slip tape on the Boards.

Slide the Patient – Not the Board
Remember: Slide the patient across the board. Do not slide the board, with the patient on top, across the bed. Hand Slots are designed when carrying the board, not for when transferring patients.