Leg Support

Unit of Measurement: Each
SKU:

$123.00 AUD$198.00 AUD

Clear
  • Description
  • Technical
  • Cleaning
  • Important Information

Description

Main Features

  • Convoluted foam under the calves
  • No pressure on heels
  • Helps prevent foot-drop
  • Helps prevent oedema
  • Light to move or carry
  • Water-resistant cover made for oedema / incontinent patients
  • Feet raised off cold and draughty floors
  • Soft foam construction that should not harm patients if they walk into it

When the legs are correctly in position, the weight is spread between the legs and the feet. This means there is no pressure on the heels. Possibly some patients with large, heavy legs, could have a slight pressure on the heels, although by adjusting the position of the Leg Support, this pressure may be prevented. The Leg Support has a series of ridges to provide a soft convoluted surface for the calves to rest. Foot-drop may be prevented by resting the feet on the angles front foot-rest, and as the Leg Support is made from foam, the patient can press against the foot-rest section to exercise the feet.

When in use, please note that the Leg Support can be tilted up a bit, to provide alternative pressure points on the leg. During the course of a day, a patient may like the support altered from the normal position to a variety of different angles. Some oedema patients may need extra height for resting their legs, and use the support upside-down, thus losing the advantage of the leg and feet supports. With some badly contracted patients, it may be better to use the support back to front but this can only be determined after observation of the patient’s posture by nursing staff.

 

Leg Support – Heat Sealed

This item is also available with a 100% Heat Sealed cover. To allow for the heat sealed seam, there is a small ‘skirt’ at the bottom of the item. This will not affect how the item is used.

 

This product is to help with the prevention of pressure sores. Sometimes, due to the patient deteriorating, the product may become unsuitable. Continuous monitoring is necessary and alternative products may be recommended.

Item # 120 - With Standard Cover

Item # 120HS - Heat Sealed

Size:

Centimetres: 35cm wide, 34cm deep (front to back), 30cm tall (in front of feet) 36cm tall (behind calves)

Inches: 13.5" wide, 13.5" deep (front to back), 12" tall (in front of feet) 14"tall (behind calves)

Standard Version: Wipe clean with a hospital grade disinfectant or remove cover and wash up to 80°C (176°F). Air or tumble dry on a cool setting, ensuring the drum is cool. Ensure the product is dry before using or storing.

Heat Sealed Version: Wipe clean with a hospital grade disinfectant. Wipe dry. Ensure the product is dry before using or storing.

This product is to help with the prevention of pressure sores. Sometimes, due to the patient deteriorating, the product may become unsuitable. Continuous monitoring is necessary and alternative products may be recommended.

SKU: N/A
Subscribe
SUBSCRIBE NOW

Subscribe to our
eNewsletter

Stay updated with new products
close-link