Bed Step – Two Steps
- Important Information
The Bed Step is designed to help patients get into and out of bed, when the bed will not go down low enough. This may be due to the design of the bed, particularly if an overlay pressure mattress is fitted to the bed. By using the Bed Step it makes the person able to get in and out of bed more easily, by allowing their bottom may go nearer to the middle of the bed.
Two heights of Steps are available:
- Bed Step – One Step (10cm/4″ – see separate product)
- Bed Step – Two Steps (20cm/8″)
The Bed Steps have wipeable medical grade, heat sealed vinyl covers. They have Non-Slip Material on the bottom to help prevent them from moving.
To Use: The Bed Step is placed along side the bed, so that when the patient is standing facing the head of the bed, they can step onto the first Step possibly having a hand on the mattress to steady themselves. Ensure their heel is in front of the marked line. The Steps are large enough to have two feet on them. The patient can shuffle forward and mount the second step, then they can do a quarter turn so their bottom will be positioned to sit on the side of the bed. The Bed Step can also be used for getting ON or OFF ambulance trolleys.
The decision to use the 10cm / 4″ or the 20cm / 8″ Bed Step will depend on the height of the bed, so long as the patient’s bottom will be safely near the middle of the bed.)
Safe Working Load (SWL): 330kg / 730lbs
Item # 534HS
Wipe clean with a hospital grade disinfectant. Wipe dry. Ensure the product is dry before using or storing. If the lines fade, re-apply them with a red texta.
Warning: Most patients will need assistance from a Carer when using this product.