|
We are currently updating our product drawings to photographs. Press the REFRESH or RELOAD button to
ensure you are seeing the latest product image.
| 
 |
CVA Arm Support Cushion Cover
Item # 240
* Sold as a cover only - filling not included to keep freight costs down
This special cushion consists of an outer Terry Towelling cover which is comfortable for patient’s arms and hands. On request this product can be made in a water-resistant material. A large inner polythene liner bag is provided and this has to be filled by the customer with polystyrene balls as used in bean bags. The amount of balls needed will vary according to the size of the patient and size of the chair.
The narrow ‘neck’ of the cushion should be placed behind the patient’s back and the patient leans back against the neck. This should hold the neck part in position although an elasticised loop is sewn into the end of the neck in case it is necessary to tie the neck to the back of the chair. If the neck is filled with balls, this can make a lumbar support for the patient.
The main ‘body’ of the cushion is placed on the chair and moulded into shape to support the patient’s arm and hand. Another elasticised loop is provided at the end of the body and a ribbon can be used to secure the loop either around the patient’s wrist or to one of the chair arms. After the patient has been in one position for a time, the nurse can alter the position to improve circulation. The CVA Arm Support Cushion can also be used for ‘tilting’ patients to help them to sit upright.
The balls to fill the cushion can be easily purchased from most stores (K-Mart, Target, Big W, Coles, etc). One pack of balls could fill four or five CVA cushions. After filling the liner bag, squeeze the bag to expel most of the air inside and then tie a large, loose single knot, at the correct place to prevent the balls from going into the neck of the cushion. The loose knot will allow the air to escape but stop the balls from coming out. The inner liner bag can be removed when the outer cover is being washed.
This product is to help with the prevention of pressure sores. Sometimes, due to the patient deteriorating, the product may become unsuitable. Continuous monitoring is necessary and alternative products may be recommended.
Washing: Hand or machine wash only, up to 80°C. Do not tumble dry or wring - air dry only.
Frequently Asked Questions
Why isn't the filling supplied?
This is simply due to the freight cost. To send the filling with this item would mean the customer would have to pay a much higher freight cost. The filling can be purchased from most department stores (K-Mart, Target etc.)
How much should I fill the cover?
This depends on how 'full' you want the cover to be. It is not ideal to have it packed - you want some give in it.
 AUD$ 39.00
GST Free unless
otherwise indicated
|
Qty:
More information about this product can be obtained by contacting Pelican Manufacturing.
|
